ERA AGM – For all vehicles where a conventional battery reaches its limits
These are in particular vehicles with an advanced start / stop system, but also middle and upper class vehicles with the highest energy requirements. Because of the multitude of comfort and safety systems, the demands on mobile energy supply are growing. In addition, a large number of vehicles are originally equipped with AGM batteries.
In the event of a replacement, only a new AGM battery can be used. The AGM battery differs from other batteries in that the acid is bound in a special fleece. This significantly increases the power reserves and prevents acid stratification. As an ERA AGM battery is guaranteed to be leak proof due to its design, it can be transported and installed safely even under difficult circumstances. ERA AGM proves even under the most extreme conditions that ERA starter batteries perform to the limit of what is technically feasible. The result is clear: an absolutely reliable energy supply at the highest level and the greatest possible security that is available on the market today.
ERA AGM – The best solution for vehicles with an advanced start / stop system and for vehicles with the highest energy requirements due to extensive safety – and comfort functions
- For modern start-stop systems
- Latest OE technology
- Ideal for medium- and upper class cars, SUVs, delivery vans and vehicles with energy-intensive electrical equipment
- Very large application coverage with only a few types
- Extremely long battery life and cycle stability
- 100% tilt- and leak proof
- ΄High performance grid΄ for more cold cranking performance and increased corrosion protection
- Highest safety features
- ΄Plug and play΄ (filled, loaded and ready to go)
- Made in Europe.
- Clutches have become high tech parts over the years.
- The clutch plate typically consists of two friction rings riveted to a steel carrier plate. The carrier plate is suspended on a base plate by vibration damping springs which make sure the clutch engages smoothly and which dampen flywheel vibrations.
- NIPPARTS clutch kit are made from the best friction material and are produced according to OE standards and specifications to guarantee a flawless operation and a long lasting life span.
View the online catalogue
- The main cylinder is a key component in the security system of a car. Reliability is therefore a key element.
- The cylinder and the piston must be made of high quality metals, offering excellent corrosion resistance even in contact with erosive and hygroscopic brake fluids.
- Manufacturing tolerances and surface roughness must be meticulously calculated to ensure smooth operation and low wear. On the other hand, rubber linings must be resistant to brake fluid and ageing.
- All Nipparts products are characterized by:
- Perfect functioning thanks to high-precision production
- High durability thanks to high quality materials.
View the online catalogue
- The quality of a joint kit largely depends on manufacturing tolerances choice of steel quality and hardening of the slots and balls.
- After 30 years of experience with manufacturing high quality joint kit Nipparts has the technology and the knowledge to produce durable joint kit in OE matching quality.
- This way Nipparts is able to offer a wide range of friendly priced high quality joint kit.
View the online catalogue
- Clutches have become high tech parts over the years.
- The clutch plate typically consists of two friction rings riveted to a steel carrier plate.
- The carrier plate is suspended on a base plate by vibration damping springs which make sure the clutch engages smoothly and which dampen flywheel vibrations.
- Nipparts clutch parts are made from the best friction material and are produced according to OE standards and specifications to guarantee a flawless operation and a long lasting life span.
View the online catalogue
- Steering parts are wear items and need regular check ups.
- Worn parts affect road behavior comfort and safety and should be replaced when worn.
- Nipparts steering parts are made with the best materials and tested before shipped.
- Also Nipparts steering parts come with all necessary bolts for easy and safe assembly.
View the online catalogue
- The bearings allow the wheels to turn at high speeds with a very low coefficient of friction, despite the heavy loads they have to withstand.
- They are a very important safety element. However, if wear leads to excessive backlash, stability can be affected. In the worst case scenario, the wheel may lock or even come off completely.
- Nipparts bearings are high-tech products that offer the same qualitiy as the original bearings.
- Nipparts kits include all components required for repairing and replacing wheel bearings, such as seals and centring ring.
View the online catalogue
- When it comes to stability, comfort and handling, shock absorbers are the most important component.
- Since shock absorbers are continuously under load, they have a limited service life.
- Their performance can vary depending on driving style, the model and weight of the car and the type of road.
- Nipparts offers a range of high quality shock absorbers, manufactured according to OE specifications and coated to prevent rust.
View the online catalogue
- Nipparts brake shoes are the result of more than 30 years of experience in friction technology and offer the best braking performance available.
- They are made of durable friction materials that provide excellent heat transfer to the drum. They are free of heavy metals, therefore safe for the environment and mechanics.
- Nipparts brake shoes guarantee safe and reliable braking performance in all driving conditions.
- All products comply with ECE R90 regulations and comply with OE standards.
- The main features of Nipparts brake shoes are:
- Excellent level of friction
- Optimal control
- Excellent heat distribution and drum transfer
- Long service life, due to the durable friction material.
View the online catalogue
- In a drum brake, the friction material is glued or riveted to the brake shoe, which consists of a bent pressure plate and a perpendicular reinforcement plate. During braking, the brake shoe is pushed towards the inside of the drum, creating friction between the coating and the drum.
- The quality of the friction material is crucial.
- High temperatures can cause damage to both the drum and the coating material, resulting in permanent loss of friction.
View the online catalogue